Blades Training, L1 Blade Inspection
Blades Training, L1 Blade Inspection
Blades Training, L1 Blade Inspection

Blades Training, L1 Blade Inspection

To certify the participants ability to perform blade service inspection on all types of WTG blades, according to Global Blade Service Standard and Global Wind Academy. NOTE : A minimum of 4 participants is required for this course to be created

24/Nov/2020 - 26/Nov/2020
Start date 24/11/2020
End date 26/11/2020

Additional options

GWO data for the participant will be uploaded in the GWO WINDA Database. You can also order a plastic GWO ID card.

Disclaimer:
An additional Winda fee of DKK 150 will be added for each participant per module

Amount of participants
* required
Information

Course Objectives:

Carry out General Visual Inspection, from ground level.
Carry out Close Visual inspection, use of hands, tape measures, photo cards, off rope or crane.
Carry out Detailed Visual Inspection. Use of tools to further inspection of damage by sanding away damaged paint/gelcoat, and visually inspect laminate, and bonded joints.
Inspection and mesuring out LPS and making documentation.
Recognize different types of defects and damages.
Assess and categorize defects and damages.
Carry out minor cosmetic repair of surface coatings.
Use correct terms for blade communication.
Fill in blade status report.
Describe the general construction of WTG blades.
Describe health risk involved when handling polyester, epoxy and isocyanates.